Technical Q&A

HSS Twist Drills are versatile cutting tools designed for precise holes in metal, wood, plastic and composites. Jiateng Tools lists M2, M35 and M42 among the HSS grades used across this range.

The current Jiateng Tools HSS range lists M2, M35 and M42. The suitable grade should be selected according to the workpiece, cutting conditions, expected service life and target price.

M2 is a practical general-purpose industrial HSS. M35 is a cobalt-bearing HSS, commonly used when higher cutting temperature and harder workpieces require greater hot hardness. M42 is a more highly alloyed cobalt HSS for demanding heat- and wear-intensive applications. Final selection should be confirmed by the real application and sample testing.

No. M35 is a cobalt-bearing high-speed steel grade, while titanium coating is a surface treatment. The base steel grade and the coating should be specified separately.

They are different manufacturing routes that can affect geometry, accuracy, surface condition and cost. The better choice depends on the drilling application and the buyer's performance target.

The Jiateng Tools catalogue positions HSS Twist Drills for drilling metal, wood, plastic and composite materials. The exact HSS grade, point geometry and finish should be matched to the workpiece and cutting conditions.

Jiateng's current product and manufacturing content includes 118-degree and 135-degree point configurations. A 135-degree split point can improve centering and chip breaking in suitable applications, while the final point design should be confirmed against the workpiece and drilling conditions.

Jiateng positions DIN 338 as a jobber-length drill programme, DIN 340 as a long-series programme for deeper holes or extended reach, and DIN 1897 as a stub-length programme for greater rigidity and controlled drilling.

The Jiateng Tools Hammer Drill Bits range is positioned for drilling concrete, masonry, brick and stone with compatible rotary hammer or hammer-drill equipment.

The current product description identifies carbide cutting tips together with impact-resistant construction. Final shank type and dimensions should be confirmed before ordering.

The Jiateng Tools Masonry Drill Bit range is positioned for hard, brittle materials such as concrete, brick, stone and mortar.

Confirm the target material, required dimensions, shank configuration and drilling equipment. The current range emphasizes cutting geometry and tip construction intended to withstand abrasion while limiting wear and heat buildup.

The Jiateng Tools Wood Drill Bits range is designed for drilling wood, plywood, MDF and hardwood.

The cutting form is designed to reduce splintering and friction while helping remove chips efficiently during drilling.

The range is positioned for construction, demolition, powered material removal, cutting and shaping applications.

A chisel is a cutting or shaping tool with a sharp, hardened edge at the end of a metal blade. Final tool configuration and dimensions should be matched to the intended application.

The Jiateng Tools diamond range is positioned for cutting hard materials such as concrete, masonry, stone and tile.

Confirm the required diameter, bore, segment specification, target material, packaging and quantity for the selected application.

The catalogue range includes options for wood, plywood, laminated board, aluminium, plastics, grass and selected metal-cutting applications.

Confirm the required diameter, bore, kerf, tooth count, tooth geometry, target material, packaging and quantity for the selected application.

The Jiateng Tools range is positioned for cutting, grinding, deburring and surface-finishing work. Confirm the workpiece material and required operation before ordering.

Confirm the disc type, dimensions, bore, abrasive material, grit, maximum operating speed, target material, packaging and quantity.

Jiateng's manufacturing guide shows a route that includes raw-material preparation, straightening and cutting, chamfering, heat treatment, multiple grinding operations, flute grinding, edge cleaning, point grinding, fine finishing, inspection, laser marking and packing.

The current Jiateng content emphasizes incoming material verification, dimensional and geometry checks, hardness and performance checks, visual inspection, marking verification and pre-shipment packaging inspection.

Yes. A sample approval stage can be used to confirm dimensions, finish, marking and packaging before a repeat production programme.

The available finish depends on the confirmed product specification. State the required finish and application in the RFQ so the correct process can be reviewed.

Jiateng Tools states more than 20 years of drill manufacturing experience, a production area of more than 6,000 square metres, more than 120 key production machines and daily output of 100,000 drill bits.

The current core product structure includes HSS Twist Drills, Hammer Drill Bits, Chisel & Hollow Core, Masonry Drill Bit, Wood Drill Bits, Diamond Saw Blade, TCT Saw Blade and Abrasive Disc.

The current manufacturing content focuses on material control, forming and grinding, heat treatment, dimensional and geometry checks, finish, marking, packing and final inspection against the confirmed specification.

Yes. Buyers can submit the target market, product specification, logo, packaging and estimated quantity so the programme can be reviewed, quoted and sampled.

Yes. The current site lists bulk packs, single-size tubes, drill bit sets and branded retail packaging as available programme formats. Artwork and packing details should be confirmed before production.

Provide the brand name, logo, package type, language, barcode requirements, set configuration, carton information and estimated quantity.

Jiateng's OEM programme includes product marking and private-label support. The required logo, marking method, position and product specification should be confirmed during the quotation and sample stage.

Yes. Jiateng's OEM programme includes set configuration. Buyers should provide the desired size combination, package type, branding and target market so the configuration can be reviewed.

Tell us the product type, applicable standard, diameter or size range, material grade or target application, point angle or cutting geometry, finish, packaging and estimated quantity. Drawings or a reference sample are also welcome.

Yes. Sample evaluation can be arranged for standard or selected custom specifications before a production order is confirmed.

Include the product category, dimensions, material or application, finish, packaging requirement, target quantity and any applicable standard such as DIN or ANSI.

The current Jiateng Tools website is organized for importers, distributors, industrial buyers and tool brands that need repeatable specifications, OEM support and dependable supply.

A confirmed reference sample gives purchasing, production and quality teams a common standard for dimensions, finish, marking and packaging before repeat production.

Compare the same specification: product type, material grade, dimensions, geometry, finish or coating, packaging, sample approval method, quantity and commercial terms. A like-for-like specification makes quotations easier to evaluate.